Characteristics of SARS-CoV-2 Transmission among Meat Processing Workers in Nebraska, USA, and Effectiveness of Risk Mitigation Measures.

The coronavirus disease (COVID-19) pandemic has severely impacted the meat processing industry in the United States. We sought to detail demographics and outcomes of severe acute respiratory syndrome coronavirus 2 infections among workers in Nebraska meat processing facilities and determine the effects of initiating universal mask policies and installing physical barriers at 13 meat processing facilities. During April 1-July 31, 2020, COVID-19 was diagnosed in 5,002 Nebraska meat processing workers (attack rate 19%). After initiating both universal masking and physical barrier interventions, 8/13 facilities showed a statistically significant reduction in COVID-19 incidence in <10 days. Characteristics and incidence of confirmed cases aligned with many nationwide trends becoming apparent during this pandemic: specifically, high attack rates among meat processing industry workers, disproportionately high risk of adverse outcomes among ethnic and racial minority groups and men, and effectiveness of using multiple prevention and control interventions to reduce disease transmission.

Contemporary chemical lean determination used in the Australian meat processing industry: A method comparison.

Chemical Lean (CL) is defined as the amount of lean red meat compared to the amount of fat in a meat product. CL determination is a mandatory, AUS-MEAT Ltd. prescribed requirement for any bulk packed meat product destined for export. Fifteen methods are approved by AUS-MEAT Ltd., for use in Australian industry. Engagement with Australian meat processors indicated that a range of methods were used for CL measurements in industry, ranging from wet chemical to instrumental based techniques. Meat (consisting of beef, lamb and pork) was used in a method comparison which included Soxhlet fat extraction and microwave moisture analysis, along with instrumental techniques; near infrared reflectance and transmittance, nuclear magnetic resonance and X-Ray. The methods were compared using Passing-Bablok regression, Bland-Altman plot analysis, and robust z-scores, indicating that overall showed that each method performed satisfactorily, suitable for CL determination in the Australian meat industry.

Historical Trend of Work-Related Musculoskeletal Disorders in the Meatpacking and Auto Industries, 1980s-Present.

Occupational Applications This paper provides a historical overview of the rise of Work-Related Musculoskeletal Disorders (WMSDs) in the U.S. from the 1980s to the present, with a special focus on the two industries with the highest recorded rates: Meatpacking and Auto Assembly. The activities underlying this account amount to a major occupational health success story (although still incomplete) in the recognition of these disorders and the development of a nation-wide effort for prevention. An obstacle in creating the data presented here was that the system of recordkeeping changed in multiple ways, making it difficult to compare WMSD rates over time. The work summarized here evaluated the effect of these changes and combined temporal segments that were judged to be the most accurate to create an overall trend line. These results can aid in: 1) showing the overall history of the recognition and prevention of WMSDs, 2) understanding the effects of the recordkeeping changes, and 3) allowing international comparisons of the trends.

History of the Landmark U.S. Ergonomics Guidelines for Meatpacking.

OCCUPATIONAL APPLICATIONS The 1990 publication of the Ergonomics Program Management Guidelines for Meatpacking Plants by the U.S. Occupational Safety and Health Administration (OSHA) was a milestone in the history of occupational ergonomics and the prevention of Work-Related Musculoskeletal Disorders (WMSDs). This paper provides an overview of the development of these guidelines based on personal experience and perception, with special emphasis of the central role the industry trade association, the American Meat Institute (AMI). Industry-wide efforts were successful in reducing the extremely high rates of WMSDs in the U.S. meatpacking industry. Described here are the specific steps the AMI undertook, which serve as a model for other groups on ways to address shared problems. Insights are also offered on why these OSHA guidelines were accepted by industry and succeeded, while other equivalent standards did not - including to some extent the de facto application of concepts of cognitive ergonomics to government documents. This report addresses specific events in the U.S., but the implications are broader and have potential widespread relevance.

Shelf-life and microbial community dynamics of super-chilled beef imported from Australia to China.

The aim of this study was to investigate the shelf-life and microbial community dynamics of super-chilled vacuum-packaged beef striploins imported from Australia to China after approximately five weeks of shipping time and an additional 15 weeks of storage at -1 °C ±â€¯0.5 °C. Data analysis using a mixed model (REML) with time as the fixed effect and portion as a random effect, showed that the only beef quality trait that changed during storage was total volatile basic nitrogen (TVBN; P < .05), which reached the threshold of 15 mg/100 g between 15 and 20 weeks (including 5 weeks of transport). The total viable count (TVC) accounted for 78% of the variance in TVBN, when storage time was included in the model. Sensory scores decreased as storage time extended (P < .05), but were still acceptable at 20 weeks. After 9 weeks, Carnobacterium spp. and Lactobacillus spp. dominated alternately and then Lactobacillus became the most prevalent bacteria. An operational taxominc unit based hierarchical cluster analysis using the unweighted pair-group method with arithmetic means was performed and it was shown that the bacterial communities tended to be consistent as storage time extended. Overall indications are that beef which is safe can be imported into China from Australia and aged for extended periods.

Essential oils as natural additives to prevent oxidation reactions in meat and meat products: A review.

Oxidation reactions during manufacturing, distribution, and storage of meat and meat products result in undesirable physicochemical changes and aromas, which leads to detrimental effects on the product quality. This could be translated into the consumer dissatisfaction and economic loss. One of the most common practices to overcome this issue is the incorporation of synthetic antioxidants. However, the increasing health-consciousness of consumers and their preference for natural additives leads to the search of natural alternatives to synthetic antioxidants. A number of essential oils have strong antioxidant properties and are explored as potential alternatives to chemical antioxidants in the meat industry. These compounds are classified as Generally Recognized as Safe (GRAS), and their application single or combined with other essential oils, ingredients or preservation technologies have beneficial effects on meat products. Their activity depends on several parameters including their concentrations, their possible synergistic effects, and the extraction method used to obtain them. Although steam distillation is the most common industrial technique for essential oils extraction, novel technologies have been emerged to address the drawbacks of the traditional extraction method and to obtain high-quality essential oils. This paper provides an overview of the application of essential oils as potential substitutes for synthetic antioxidants in the meat industry, exploring their mechanism of action against oxidation reactions, and the effect of extraction methods on their effectiveness.

Active packaging films with natural antioxidants to be used in meat industry: A review.

Spoilage of meat products during processing, distribution and exposure in the markets have an important negative impact on meat industry from an economic point of view. Two of the main problems of meat and products during processing and subsequent storage are lipid oxidation and deterioration due to microorganism growth. In this context, several packaging alternatives have been developed by meat industry in order to limit these losses and to extend the meat products´ shelf life. Over the last years, the use of active packaging has been proposed as an alternative to traditional packaging. The principle of active packaging, particularly antioxidant active packaging, consists of including active agents in the packaging which interact with meat and/or its environment, either by trapping pro-oxidant compounds or by releasing antioxidant compounds in order to delay degradation due to lipid oxidation. Therefore, the use of active packaging is presented as a future option to solve the problems derived from oxidative deterioration of meat and meat products. However, its use will depend on the costs involved in the development of this active packaging. Therefore, this review will give an overview about the use of active packaging and natural antioxidants, the active film development techniques, as well as the use of biopolymers as substitutes for synthetic polymers and their direct application in the meat industry.

Electrical stimulation or moisture infusion improves the eating quality attributes of loin and silverside cuts from female and immunocastrated male pigs.

This study validated the effect of gender (female, immunocastrated male; n = 50), electrical stimulation (none or 150 mA constant current for 30 s at 2 min post-slaughter) and ageing period (2 or 14 d) on the eating quality of pork roast and stir fry sourced from the loin (M. longissimus thoracis et lumborum) and silverside (M. biceps femoris) and steak from the loin only. Moisture infusion was applied to 2 d aged, non-stimulated primals as a positive control treatment. Neither gender nor ageing period influenced (P > 0.05) eating quality. Electrical stimulation and moisture infusion were each effective interventions in improving pork eating quality, but their effects were inconsistent between the five cuts evaluated. No interventions achieved the fail rate target of <10% for quality grade for all cuts, indicating that additional interventions are needed to enable industry to consistently deliver high quality pork.

Influence of surfactants and proteins on the properties of wet edible calcium alginate meat coatings.

Calcium alginate structures are of interest as replacers for natural casings due to their high availability, biodegradability and low price. The aim of this paper is to study the effect of oil, surfactants and proteins (pea and collagen) on the water transfer, mechanical and microstructural properties of the wet calcium alginate films. The addition of oil and surfactants tended to reduce the water permeance and the weight loss rate, reaching values between those shown by natural and collagen artificial casings. The addition of proteins did not improve the adherence of the films and it decreased the maximum force of the film at puncture test, which was even lower with the presence of the surfactant E475. The TEM micrographs showed that the differences in mechanical properties are mainly related to the differences in the compaction of the microstructure. Wet alginate films with E475 are envisaged as a substitute of natural and collagen artificial casings in the stuffed meat products industry.

Chitosan active films containing agro-industrial residue extracts for shelf life extension of chicken restructured product.

This study aimed to develop chitosan films incorporating natural antioxidants from peanut skin (EPS) and pink pepper residue (EPP) extracts, as well as to evaluate their effects on lipid oxidation, pH, color, and microbial counts of a restructured chicken product. EPS had higher phenolic content and antioxidant activity compared to EPP. When both extracts were applied to chicken meat and the chitosan films, there were no differences for color, pH and total mesophilic counts compared to control at the end of the storage period. For lipid oxidation (peroxide value and thiobarbituric acid reactive substances), both extracts proved to be as effective as butylated hydroxytoluene to maintain the oxidative stability of the chicken product. The microbial counts of psychrotrophic microorganisms were significantly lower for treatments with active films. Chitosan active films with residue extracts may maintain the quality of chicken products due to their antioxidant and antimicrobial potential.

Guinea pig for meat production: A systematic review of factors affecting the production, carcass and meat quality.

In developing countries, interest in guinea pig farming is growing exponentially because it provides a regular source of high quality animal protein for domestic consumption. Guinea pigs (Cavia porcellus) are prolific animals, grow and are capable of reproduction on a flexible diet, and are adaptable to a wide range of climates. This article mainly reviews findings on guinea pig meat production, including factors affecting raising guinea pigs, carcass and meat quality. We also present some studies that describe biological and pathologic effects on carcass component composition. During the last decades no standard procedure has been established for guinea pig carcass evaluation, which makes very difficult any comparison of results with other studies around the world. Herein we highlight a variety of factors that significantly affect carcass and meat quality. Some of these factors are production systems, environmental and genetic factors, management systems, the diet and health status, age, sex and reproductive management.

The physical and biochemical effects of pre-rigor high pressure processing of beef.

High pressure processing (HPP) of pre-rigor longissimus thoracis (strip loin) from prime and bull animals substantially decreased the shear force and improved consumer eating attributes of the final meat product. The improved tenderness in both prime and bull meat was associated with a lower myofibrillar fragmentation index and reduced calpain 1 activity which indicated the mechanism of tenderisation was different from that which occurred in chill aged meat. Light microscopy showed disruption to the fibre packing within the muscle and electron microscopy confirmed significant disruption of the Z discs and M lines and disappearance of the A lines. Thus, HPP is associated with a reduction in the structural integrity and strength of the sarcomeres. These effects were consistent in strip loins sourced from prime and bull stock. HPP also led to the movement of glycogen phosphorylase from the sarcoplasmic fraction to the insoluble myofibrillar fraction in all animals and this was associated with a higher pH at 24 h.

Antimicrobial effect of different peroxyacetic acid and hydrogen peroxide formats against spores of Clostridium estertheticum.

"Blown pack" spoilage is primarily caused by Clostridium estertheticum. The primary source of contamination is probably pelts, faeces and soil during opening cuts and de-hiding. Peroxyacetic acid (POAA) based fogs are commonly included in an abattoir's routine cleaning process. Hydrogen peroxide (H2O2) is a powerful oxidizing agent that penetrates microbe cell walls causing cell death. In this study, we compared the ability of H2O2 and OXYSAN ZS (POAA containing 1-hydroxyethylidine-1,1-diphosphonic acid as a stabilizer) in different formats to inactivate C. estertheticum spores. Hydrogen peroxide treatment using Phytagel™ gel as carrier was effective on fleece against both naturally contaminating microflora and C. estertheticum spores. This is the first time an antimicrobial treatment has been shown to inactivate C. estertheticum spores on such a complex and highly contaminated matrix. Both H2O2 and OXYSAN ZS treatments inactivated C. estertheticum spores on stainless steel indicating their potential use as an in-plant decontamination procedure or inclusion in routine in-process cleaning.

Disinfection of transboundary animal disease viruses on surfaces used in pork packing plants.

In the event of an intentional or accidental incursion of a transboundary animal disease (TAD) virus into the US, a major concern to the meat industry would be the potential contamination of packing plants by processing infected animals. TAD agents such as foot and mouth disease virus (FMDV), African swine fever virus (ASFV) and classical swine fever virus (CSFV) are found in swine products such as blood and feces and are present in the tissues of infected animals. To test the disinfection of TAD viruses in a pork-packing environment, a previously developed disinfection assay was used to test two biocides currently used by industry sanitarians, against TAD viruses dried on industry relevant surfaces in saline or swine products. With the exception of one virus, both commercial disinfectants tested were effective against the TAD viruses dried on steel, plastic, and sealed concrete surfaces in the absence of the swine products. Disinfectant activity was greatly inhibited in the presence of dried blood and meat juices. The acidic disinfectants were able to inactivate the viruses in swine feces whereas fecal material generally inhibited sodium hypochlorite-based disinfectants. These results highlight the importance of manufacturer-recommended pre-cleaning steps to remove gross soil before surface disinfection. Taken together, these data support the use of acid- and surfactant-containing commercial products for packing plant disinfection during a TAD virus outbreak event.

Pink slimed: Media framing of novel food technologies and risk related to ground beef and processed foods in the U.S.

In March 2012 ABC World News Report aired a series of reports on lean finely textured beef (LFTB) that resulted in a 10-year low for beef prices and the bankruptcy of a major firm that produced LFTB. Using a random sample survey, we tested the effects of the media frame "pink slime" and industry frame "lean finely textured beef," alongside media use, food-related knowledge, trust in food-related institutions and preference for local, fresh, organic and GMO-free foods on perceptions of risk related to ground beef containing pink slime/LFTB, processed foods and red meat. The "pink slime" frame was strongly and positively associated with risk related to ground beef, but not risk related to red meat or processed foods. Attention to news stories about pink slime/LFTB was strongly associated with risk related to ground beef and processed foods, but not red meat. We found varying effects of food values, knowledge and trust on all three dependent variables. Implications are discussed.

Predictability of lean product, bone, and fat trim in beef carcasses from Costa Rica.

Data from 292 hot fat trimmed carcasses derived from Costa Rican cattle were used to predict yield of fabricated boneless, closely-trimmed, high-valued cuts (BVS, by weight and percentage); yield of total saleable product (TSP, by weight and percentage); and percentage yields of bone and trim fat. Backfat thickness was not significantly associated with weight of BVS or TSP. Carcass weight explained 93.7% and 95.9% of the total variation in weight of BVS and TSP, respectively. Equations for predicting percentage yields of BVS and TSP showed little predictive efficacy. Conversely, the greater precision of the equations selected to predict the quantity (kg) of BVS or TSP, offers a practical alternative of using them in hot fat trimmed carcasses.

Migration from plastic packaging into meat.

Migration is a known phenomenon defined as the partitioning of chemical compounds from the packaging into food, and depends on several factors. Migration assays are generally time-consuming and require specific conditions in order to investigate the behavior of the packaging in different situations. Furthermore, these tests are often performed with food simulants, since the determination of migration under real conditions is highly impaired. Several methodologies have been designed to carry out this study, but an ideal approach should be capable of assessing the migration of compounds in real samples, providing fast and reliable results. Within this context, mass spectrometry can be considered a suitable and versatile technique that shows great potential to accurately characterize several contaminants in food by migration. Thus, in this work we present a mass spectrometry-based application for the detection of several compounds from plastic, directly from vacuum-packed meat samples. This preliminary and simple workflow can be easily applied in routine analyses for either quality control purposes or in the prospection of other potential bioactive contaminants in food.

Application of Raman spectroscopy and chemometric techniques to assess sensory characteristics of young dairy bull beef.

This work aims to develop a rapid analytical technique to predict beef sensory attributes using Raman spectroscopy (RS) and to investigate correlations between sensory attributes using chemometric analysis. Beef samples (n = 72) were obtained from young dairy bulls (Holstein-Friesian and Jersey×Holstein-Friesian) slaughtered at 15 and 19 months old. Trained sensory panel evaluation and Raman spectral data acquisition were both carried out on the same longissimus thoracis muscles after ageing for 21 days. The best prediction results were obtained using a Raman frequency range of 1300-2800 cm-1. Prediction performance of partial least squares regression (PLSR) models developed using all samples were moderate to high for all sensory attributes (R2CV values of 0.50-0.84 and RMSECV values of 1.31-9.07) and were particularly high for desirable flavour attributes (R2CVs of 0.80-0.84, RMSECVs of 4.21-4.65). For PLSR models developed on subsets of beef samples i.e. beef of an identical age or breed type, significant improvements on prediction performances were achieved for overall sensory attributes (R2CVs of 0.63-0.89 and RMSECVs of 0.38-6.88 for each breed type; R2CVs of 0.52-0.89 and RMSECVs of 0.96-6.36 for each age group). Chemometric analysis revealed strong correlations between sensory attributes. Raman spectroscopy combined with chemometric analysis was demonstrated to have high potential as a rapid and non-destructive technique to predict the sensory quality traits of young dairy bull beef.

Influence of carcass weight on meat quality of commercial feedlot steers with similar feedlot, slaughter and post-mortem management.

The effects of beef carcass weight on muscle pH/temperature profile and selected meat quality attributes were evaluated. Twenty-six carcasses from light (≤260kg, n=15) and heavy (≥290kg, n=11) feedlot steers were randomly allocated and stimulated with low voltage electrical stimulation (LVES) for 30s at 7min post-mortem (pm). Quality evaluations were carried out on samples from the Longissimus et lumborum (LL) muscle from the left side of each carcass. Heavier carcasses showed faster pH decline and slower (P<0.05) temperature decline at 45min, 3, 6, 12 and 24h pm. Heavier carcasses passed through the heat shortening window (i.e. at pH6, temperature was >35°C) but there was no sign of sarcomere shortening in any carcass. Significantly lower (P<0.05) shear force values were recorded in the heavier carcasses at 3days pm but at 14days pm, heavier carcasses had numerically lower but not significantly different shear force. Heavier carcasses produced numerically higher but not significant (P>0.05) drip loss at 3 and 14days pm as well as higher L* (meat lightness) (P<0.05) and C* (chroma) (P<0.05) values early (2days) pm. However, at 14days pm, there were no significant differences between the light and heavy carcasses in terms of L* and C*. No significant difference was observed between heavy and light carcasses in terms of H* at 2 and 14days pm. The study showed that heavier carcasses which favor slaughter house pricing can be produced and processed alongside lighter carcasses without significant detrimental effects on meat quality by using low voltage electrical stimulation (LVES).

Application of electrolyzed water for improving pork meat quality.

The microbiological and oxidative qualities of pork loin sprayed with different types (slightly acidic, acidic and basic) and combinations of electrolyzed water (EWs) were evaluated. The EWs were applied at two temperatures (18° and 30°C) and pressures (30 and 45psi) and the volume corresponded to approximately 10% water commonly used in carcass washing. EW after spraying exhibited a chlorine concentration between 15 and 25ppm. The application of acidic EW (AEW) alone or in combination with basic EW (BEW) decreased (P<0.05) the microbial counts shortly after spraying. In addition, the combination of BEW+AEW (30psi) reduced the mesophilic and psychrotrophic bacteria counts throughout the refrigerated storage (P<0.05). The EWs did not increase the lipid oxidation of the samples. On the other hand, a high protein oxidation was observed in the samples sprayed with AEW and slightly acidic EW (SAEW), while BEW was effective to reduce the oxidation reactions. Therefore, the results showed that the combination BEW+AEW may be a viable alternative to reduce the volume of water used at slaughter and to improve the microbiological quality of pork meat.